移動互聯網時代，5G建設、數據中心作為重要支柱，傳統的CPU、FPGA已無法滿足超大數據運算速度的需求，對電源供電提出了更高要求。放置在靠近LSI (如微處理器、DSP、FPGA、ASIC)的DC/DC轉換器POL電源如何匹配運用，接下來帶大家一起解密。

（一）6-20A：小體積、全國產化、精準可調——K12MT系列

LSI附近的電源設計需要面臨體積、兼容、精度等問題，金升陽POL電源K12MT系列可適配需求。該系列具有6A/12A/16A/20A帶載能力，輸出電壓在0.6-5.5V范圍內精準可調。

① 小體積

目前，提升電源集成度和微型化是必然趨勢。K12MT系列體積超小，集成了完整DC/DC電源解決方案所需的所有無源組件，長度和寬度下降后僅12.2*12.2mm，極大提升了系統板空間利用率。

② 全國產化

該系列采用全國產化設計，器件滿足100%國產化，不僅交付有保障，且極大縮短客戶產品設計周期。

③ 兼容性

封裝滿足DOSA、POLA標準，同時在標準基礎上增加側壁沉銅方便客戶焊接。

④ 寬電壓輸出可調

0.6-5.5V輸出電壓精準可調，可靈活設計應用與0.6/1.2/1.8/2.5/3.3/5V的分布式供電系統，如ASIC，FPGA，DSP，CPU/GPU，RAM。

 

（二）40-100A：超大電流、PMBus、高穩定——KD12T系列

目前對于超大數據運算需求，電源供電有幾個特點，對電流需求大，電壓需求低，以及負載大跳變，金升陽KD12T系列可破局。

① 超大電流40-100A

供電電流與CPU的運算速度成正比，以i7為例，所需的供電電流在75A。金升陽POL電源KD12T系列有40A、60A、100A可選。

其中40A（產品KD12T-40A）可兩模塊并聯至80A；60A（產品KD12T-60A）雙路30A/單路60A，可兩模塊并聯至120A，可滿足絕大多數應用。

 

② PMBus 數模混合

KD12T系列具備PMBus 數字通信協議功能，可實現工作狀態監控，實時監控讀取產品工況，如電壓、電流、溫度等。以及輔助失效分析，失效后黑匣子數據調用，可確定失效原因和失效前一刻的數據。

同時，好處還包括無需過多的外圍模擬器件，通過PMBus指令調節內部參數，提高一致性和穩定性；而上位機也可調節參數（編程題→填空選擇題），讀取波形數值，降低了操作的繁雜程度。

③ 高精度，低紋波

部分芯片不僅大動態變化，di/dt(上升沿)也會達到非?？斓乃俾?，峰峰值要求盡量控制在±3%以內，這對pol電源的精度、紋波、響應速度都有高要求。

KD12T系列滿足高精度輸出電壓低至±10mV，輸出紋波低至22 mV。以40A產品為例，Vo=0.6V時，紋波typ是6mV，動態 typ是18mV，在業內居于前位。

 

（三）應用案例：波分板卡

通信領域里，承載網可用于傳送各種語音和數據業務，常見設備如光通信設備。其波分板卡需要POL電源，配置3~60A，0.6~5.5Vdc，40A及以上，PMBUS功能。

波分板卡的電源方案可如下圖，用一個40A的POL電源KD12T-40A。該產品具備強力優勢，包括寬輸入電壓范圍4.5-14.4V，低輸出可調電壓0.6-4.5V，高精度±2mV、低紋波4mV、低瞬態響應偏差18mV，效率高達 95%（7.5Vin，3.3Vout，100%Io，損耗僅5.9W）。

同時功能豐富，具備PMBus、PGOOD、輸出跟蹤、遠端補償、時鐘同步、多模塊并聯、電流均流等功能。

 

In the era of mobile Internet, 5G construction and data center are important pillars. The traditional CPU and FPGA can no longer meet the demand for super data computing speed, which puts forward higher requirements for power supply. How to match and use the POL power supply of DC/DC converters placed near LSIs (such as microprocessors, DSPs, FPGAs, ASICs)? Next, let's decrypt it together.

（1） 6-20A: Small volume, nationwide production, precise adjustability - K12MT series

The power supply design near LSI needs to face issues such as volume, compatibility, and accuracy, and the K12MT series of Jinshengyang POL power supply can adapt to these requirements. This series has a load capacity of 6A/12A/16A/20A, and the output voltage is precisely adjustable in the range of 0.6-5.5V.

① Small volume

At present, improving power integration and miniaturization is an inevitable trend. The K12MT series has an ultra small size and integrates all the passive components required for a complete DC/DC power solution. The length and width have been reduced to only 12.2 * 12.2mm, greatly improving the utilization of system board space.

② National industrialization

This series adopts a nationwide production design, and the components meet 100% localization requirements. Not only is delivery guaranteed, but it also greatly shortens the customer's product design cycle.

③ Compatibility

The packaging meets DOSA and POLA standards, and side wall copper sinking is added on the basis of the standards to facilitate customer welding.

④ Wide voltage output adjustable

The output voltage of 0.6-5.5V is precisely adjustable and can be flexibly designed for applications in distributed power supply systems such as ASIC, FPGA, DSP, CPU/GPU, RAM, and 0.6/1.2/1.8/2.5/3.3/5V.

（2） 40-100A: Ultra high current, PMBus, high stability - KD12T series

At present, there are several characteristics of power supply for ultra large data computing needs, such as high current demand, low voltage demand, and large load fluctuations. The Jinshengyang KD12T series can break through this situation.

① Ultra high current 40-100A

The power supply current is directly proportional to the computing speed of the CPU. Taking i7 as an example, the required power supply current is 75A. The KD12T series of Jinshengyang POL power supply has options of 40A, 60A, and 100A.

Among them, 40A (product KD12T-40A) can be connected in parallel with two modules up to 80A; 60A (product KD12T-60A) dual 30A/single 60A, can be connected in parallel with two modules up to 120A, which can meet the vast majority of applications.

② PMBus Digital Analog Hybrid

The KD12T series has the PMBus digital communication protocol function, which can achieve work status monitoring, real-time monitoring and reading of product conditions, such as voltage, current, temperature, etc. And auxiliary failure analysis, black box data call after failure, can determine the cause of failure and the data from the moment before failure.

Meanwhile, the benefits also include not requiring too many peripheral simulator components, adjusting internal parameters through PMBus instructions, improving consistency and stability; The upper computer can also adjust parameters (programming questions → fill in the blank multiple-choice questions), read waveform values, and reduce the complexity of operations.

③ High precision, low ripple

Some chips not only undergo large dynamic changes, but also reach a very fast rate of di/dt (rising edge). The peak to peak value is required to be controlled within ± 3% as much as possible, which has high requirements for the accuracy, ripple, and response speed of the POL power supply.

The KD12T series meets the requirements of high-precision output voltage as low as ± 10mV and output ripple as low as 22 mV. Taking the 40A product as an example, when Vo=0.6V, the ripple typ is 6mV and the dynamic typ is 18mV, ranking among the top in the industry.

（3） Application case: Wavelength division board card

In the field of communication, carrier networks can be used to transmit various voice and data services, with common devices such as optical communication devices. The wavelength division board requires a POL power supply, configured with 3~60A, 0.6~5.5Vdc, 40A and above, and PMBUS function.

The power supply scheme for the wavelength division board card can be shown in the following figure, using a 40A POL power supply KD12T-40A. This product has strong advantages, including a wide input voltage range of 4.5-14.4V, low output adjustable voltage of 0.6-4.5V, high precision ± 2mV, low ripple 4mV, low transient response deviation of 18mV, and an efficiency of up to 95% (7.5Vin, 3.3Vout, 100% Io, loss of only 5.9W).

At the same time, it has rich functions, including PMBus, PGOOD, output tracking, remote compensation, clock synchronization, multi module parallel connection, current sharing, and other functions.